Are you looking for the perfect piece of furniture for your office? How about a cube? What type of cube would you like to have in your home?

Today’s inspired work is an amazing industrial cube together of 5 cinder blocks and 4 plastic parts. To simplify the process of creating your own design, I’ll start with the beginning: starting with a blueprint. To make a structure similar to this one, you’ll need to use 5 spray paint colors, 5 spaches and a water soluble paint pen.  Everything else you need to know here!

Here’s what you will need to complete this project:

Cubicle Idea For Office! Photo 3

Instructions:

Cubicle Idea For Office! Photo 4

Before starting, make sure to wipe off the ground with a cloth. If you don’t have a ground cover, you can search for artificial one.

1. Cut the top off the window frame.

Once the frame is cut, flip the window over. Then take your window frame, which will be the bottom side, and lay it on top of the cement board. Pin it in place with your hands and then apply a coat of heat-resistant paint. This project can be used as well as a window dresser if you wish.

2. Apply a coat of polyurethane.

After you’ve laid down the board, you can apply a coat of polyurethane for both the top and bottom sides. This will prevent the frame from fraying.

3. Cut the cork stopper down to size.

Once the frame is in place, you can cut the cork stopper down to size. Use commercial cutting edge blade to cut the cork bit down to size. Start gluing on the face of the frame and once that’s done cover everything with plastic and coat it with polyurethane. Apply a coat of poly after three minutes and let dry.

4. Once the frame is on, start gluing the letters on. Apply an even layer of glue to all the edges and then place the letter on the top of the frame. Press down to make sure the letters are even and then remove the glass.

5. Once the letters are in place, paint them the same color as the frame. Let dry for the time indicated on the back of the bottle.

This is how you make these DIY cork coasters! The materials needed include wooden coasters, acrylic paint, painter’s tape, craft paint and a sponge. Cut out cardboard circles and tape them to the back of the wooden coaster. This will be the design for the face of the coasters. Paint the remaining frame coat with white paint and let dry. Then use a sponge to apply a few coats of paint. You can reapply the second color if you want to add some details to the design. At the end, seal the coasters and you’re done!